Wippro Attic Stair | Isostair Luxe

The stair without visible closing gap

Attic stairs Isostair Luxe

Not fire-resistant
Thermal transmittance coefficient in the lower cover:
U = 0.33 W/m²K

(calculated) by TU Graz No. B12.137.001.484
Thermal transmittance coefficient with insulated
upper cover: U = 0.21 W/m²K

(calculated) by TU Graz No. B12.137.001.484
Airtightness class 4 tested
according to DIN EN 12114 by IFT Rosenheim per test report No. 12-001746-PR03


    inquiry
    Wippro Attic Stair | Isostair Luxe
    Wippro Attic Stair | Isostair Luxe
    Wippro Attic Stair | Isostair Luxe

    The benefits at a glance:

    • 42 cm thermally separated hatch cladding, higher versions available on request
    • 10 cm multilayer mineral wool insulation in the lower cover
    • 2 high-quality sealing layers
    • Spring-assisted telescopic handrail
    • Ball-bearing, spring-assisted, wear-free locking mechanism
    • Non-slip treads with 36 cm width x 12 cm depth
    • High-quality plastic powder coating
    • Stepless adjustment to room height
    • Recessed swivel hinges
    • Seamless underside for flush-fit look with Isotec Luxe
    • Step load capacity up to 250 kg

    Isostair Luxe

    Promptly available in the following standard sizes:


    Hatch size | Outer box dimensions (LxWxH) | Standard room height with adjustment range


    140.0 x 70.0 cm | 136.7 x 66.4 x 42.0 cm | 255.0–275.0 cm | 3-part stair unit
    130.0 x 70.0 cm | 126.7 x 66.4 x 42.0 cm | 255.0–275.0 cm | 3-part stair unit
    120.0 x 70.0 cm | 119.0 x 66.4 x 42.0 cm | 250.0–265.0 cm | 3-part stair unit
    120.0 x 60.0 cm | 119.0 x 56.4 x 42.0 cm | 250.0–265.0 cm | 3-part stair unit
    110.0 x 70.0 cm | 106.7 x 66.4 x 42.0 cm | 255.0–265.0 cm | 4-part stair unit

    Custom sizes available on request!

    With stepless adjustment to room height, they provide you with comfortable and easy use of your attic.

    A special advantage of our attic stairs is that they can also be installed into ceiling paneling.
    This means the stair can be placed even in suspended ceilings.

     

    The automatic or manually operated upper cover can be retrofitted at any time and can be opened either to the side or to the rear in the manual version. It serves both as additional insulation and as dust protection.

    42 cm hatch cladding – also available in greater heights on request!
    The ball-bearing locking system and internal swivel mechanism, along with a telescopic handrail, enable smooth, user-friendly, and safe operation of the attic access. The top step is located inside the box, enabling easy access to the attic.

    Isotec Luxe provides a seamless underside and a flush-fit look. It appears modern, elegant, and seamless, easily fitting into any architectural style.

    The Isotec Luxe lower cover is equipped with 10 cm thick mineral wool insulation. The thermal insulation ensures that no heat is lost through the stair, preventing unwanted energy loss. This helps improve the energy efficiency of your home and saves on heating costs.

    Fully pre-assembled – no tedious assembly on the construction site required!
    Please be sure to follow the enclosed installation accessories and instructions!